Antares TPG - round spotlight _ Gineico Marine
Antares TPG - round spotlight _ Gineico Marine Antares TPG_dimensiosn_LED_round_gineico marine Antares TPG_dimensiosn_LED_round_gineico marine Antares TPG_dimensiosn_LED_round_gineico marine

Antares TPG Recessed Ceiling Light

 

Antares TPG is a recessed marine grade downlight or spot light suitable for interior or exterior applications. Frameless tempered glass waterproof spotlight with unique “soft edge” design. The non corrosive glass facia is idea for interior wet areas like bathrooms or for cockpit ceilings where salt and water spray can corrode traditional down lights.

 

This clever design is very discreet because the fitting is less noticeable when the fitting is not being used during the day. The Antares TPG features a frosted glass lens and can be specified with either a 3,6W LED module, a 4,5W RGB module or a G4 halogen bulb holder.

 

  • 3,6W LED module in choice of 3200K or 4000K colour temperature
  • 4,5W RGB LED Module requires additional RGB devise #6015
  • Dimensions: Bezel size ? 115 mm.
  • 10-30Vdc power input
  • Rated IP65 water proof
  • Frosted glass lens
  • Dimmable with additional part #6018 (Power LED and Halogen only)

 

This frameless design is also available in other shapes Antares QP.

 

 

 

 

Clear
More Details
Weight 0.15 kg
Dimensions 0.9 × 0.9 × 0.3 cm
SKU: N/A Category: Tags: ,
Colour Temperature:
Format:
IP Ratings:
LED Colours:
CE Marked
Product is designed, assembled and tested according to European norms and conformities and meet the relevant EU directives.
Product is designed, assembled and tested according to European norms and conformities and meet the relevant EU directives.
Class III
Low voltage fitting, voltage below 50V.
Low voltage fitting, voltage below 50V.
Classified under photobiological risk group EN 62471
Product for Exterior Application
Suitable for use both indoors and outdoors
Suitable for use both indoors and outdoors
Suitable for Inflammable Surfaces
The F symbol has been abolished from the EN 605598 normative and different symbols are now used for identifying if the fitting is not suitable for normally inflammable surfaces. For convenience we will continue to use the old F symbol.
The F symbol has been abolished from the EN 605598 normative and different symbols are now used for identifying if the fitting is not suitable for normally inflammable surfaces. For convenience we will continue to use the old F symbol.
IP65 ingress protection
Dust tight, protected against water jets.
Dust tight, protected against water jets.
IP65-20
Recessed Ceiling and Wall Installation